User Tools

Site Tools


georef

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
georef [2021/03/10 09:51]
allchin09
georef [2021/03/10 13:31] (current)
allchin09 [Coordinate Conversion]
Line 131: Line 131:
 | scale factor   | 1                          | | scale factor   | 1                          |
  
-Other relevant values + 
-zone 8      |+On these maps, Sydney Observatory was used as a datum for triangulation, with the following values
 +^Format ^Latitude          ^Longitude         ^ 
 +|DMS    |S 33d 51m 41.10s  |E 151d 12m 17.85s | 
 +|DD     |S 33.861417d      |E 151.204958d     | 
 + 
 +The [[http://www.ga.gov.au/ngrs/imf.jsp?site=ngrs|NGDB]] provides the following values of the observatory in different datums: 
 +^Datum  ^Latitude            ^Longitude           ^Easting       ^Northing   ^ 
 +|Clarke |S33°51' 41.107"     |E151°12' 17.993"    |420746.19     |816789.65 
 +|AGD66  |S33°51' 40.2924"    |E151°12' 12.3136"   |333809.38     |6251769.51 | 
 +|AGD84  |S33°51' 40.3241"    |E151°12' 12.2557"   |333807.91     |6251768.51 | 
 +|GDA94  |S33°51' 34.610232"  |E151°12' 16.470597" |333913.76     |6251959.42 |
  
 Note: Note:
Line 154: Line 164:
  
 An explaination of parameters is as follows: An explaination of parameters is as follows:
-== Parameters ==+=== Parameters ===
  
-= +proj =+== +proj ==
   * Description: Projection name   * Description: Projection name
   * Value: tmerc   * Value: tmerc
Line 164: Line 174:
     * Note: prior to 1936, a polyconic projection was used     * Note: prior to 1936, a polyconic projection was used
  
 +== +lat_0 ==
 +  * Description: Latitude of projection centre or true origin (TO) of projection.
 +  * Value: 34s
 +  * Value description:
 +    * The true origin of ANG is 34 degrees south
 +    * This is consistant across all 8 zones in Australia
  
-^Parameter    ^Parameter Description          ^Parameter Value  ^Value Description    ^Value Comment              +== +lon_0 == 
-|+proj        |Projection name                |tmerc            |Transverse Mecator   |Type of project used in ANG+  * Description: Longitude of projection centre or true origin (TO) of projection. Also called central meridian (CM). 
-|+lat_0       |Latitude of projection centre  |34s              ||| +  * Value: 151e (for zone 8 only) 
-|+lon_0       |Longitude of projection centre |151e             ||| +  Value description: 
-|+k_0         |Scale factor                   |               ||1 is also default value| +    * Each zone has a different CM. ANG has 8 zones covering the width of Australia 
-|+a           |Semimajor radius of the ellipsoid axis |6378339.78||Value in british feet converted to metres| +    * Zone 8 covers the East of NSW 
-|+rf          ||294.26||| +    * Zones and their CM values can be found in the table below 
-|+to_meter    |Horizontal unit value          |0.91439841|Length of a yard in metres |Yard used on coordinate grid| +    * Each zone is 5 degrees wide in longitude, starting at 113d30e and ending at 153d30e 
-|+x_0         |False easting                  |365759.36||| + 
-|+y_0         |False northing                 |731518.73|||+^Zone Number  ^Western Longitude   ^Eastern Longitude ^Zone Central Meridian
 +|1            |113d30e             |118d30e           |116de                | 
 +|2            |118d30e             |123d30e           |121de                
 +|3            |123d30e             |128d30e           |126de                | 
 +|4            |128d30e             |133d30e           |131de                
 +|5            |133d30e             |138d30e           |136de                | 
 +|6            |138d30e             |143d30e           |141de                
 +|7            |143d30e             |148d30e           |146de                | 
 +|8            |148d30e             |153d30e           |151de                | 
 + 
 +== +k_0 == 
 +  * Description: Scale factor at the central meridian 
 +  * Value: (default value for tmerc in PROJ) 
 +  * Value description: 
 +    * ANG has a scale factor (SF) of 1 at the central meridian 
 +    * This means that on the CM, a measured distance on earth will equal the corresponding grid distances  
 +    * East and west of the CM, a measured distance on earth will be less than the corresponding grid distances 
 + 
 +== +a == 
 +  * Description: Semimajor radius of the ellipsoid axis 
 +  * Value: 6378339.78 
 +  * Value description: 
 +    * Based on Clarke 1858 ellposid with a defined as 20,926,348 british feet 
 +    * A conversion factor of 0.30479947 metres per british foot = 6,378,339.78m 
 + 
 +== +rf == 
 +  * Description: Inverse flattening of the ellipsoid 
 +  * Value: 294.26 
 +  * Value description: 
 +    * Based on Clarke 1858 ellposid where the inverse flattening was defined as 294.26 
 + 
 +== +to_meter == 
 +  * Description: Horizontal unit value for output coordinates 
 +  * Value: 0.91439841 
 +  * Value description: 
 +    * The ANG coordinates are in yards 
 +    * 1 yard = 3 british feet = 0.30479947 * 3 = 0.91439841 yards per metre 
 + 
 +== +x_0 == 
 +  * Description: False easting 
 +  * Value: 365759.36 
 +  * Value description: 
 +    * ANG has a false easting of 400,000 yards west of the true origin 
 +    * Converting into metres is 400,000 / 0.91439841 = 365,759.36 metres 
 + 
 +== +y_0 == 
 +  * Description: False northing 
 +  * Value: 731518.73 
 +  * Value description: 
 +    * ANG has a false northing of 800,000 yards south of the true origin 
 +    * Converting into metres is 800,000 / 0.91439841 = 731,518.73 metres
georef.1615369891.txt.gz · Last modified: 2021/03/10 09:51 by allchin09